20kWh Nano Battery 4kW Inverter Outback SystemEdge 420NC
20kWh Nano Battery 4kW Inverter Outback SystemEdge 420NC

20kWh Nano Battery 4kW Inverter Outback SystemEdge 420NC

Vendor
Outback
Regular price
$20,999.99
Sale price
$20,999.99

PLEASE contact us for ACCESS to 500 Solar Product Brands and 15,000 available solar products

Customer Service Questions, please contact 800-325-4914 or please email sales@redboxtoolsusa.com for any large orders or other questions

Power your property on or off-grid with the Made in the USA Outback SystemEdge 420NC with longer-life Nano-carbon battery. This all-in-one, hybrid battery storage package can power the average American home for 3 to 5 days without utility grid or sunshine, for about 50% less cost than Tesla Powerwall. Can also be programmed to deliver cheap PV solar energy during high peak rate periods. Works with new systems, or can be added to retrofit existing grid-tied PV solar array. Simple to use so anyone can handle installation, DIY homeowner, handyman, or contractor. No special certification required. SystemEdge includes OutBack FLEXpower Radian 4kW inverter-charger, EnergyCell Nano-Carbon NC batteries for up to 20kWh of daily power, Integrated Battery Rack (IBR), and OPTICS RE System monitoring and control. The Outback FlexPower Radian FPR-4048A is a pre-assembled and pre-wired 4,000 watt (4kW), 120V to 240Vac, continuous power system for grid-tied or stand-alone off-grid backup power system. The single unit operates as a power inverter, battery charger, and system monitor that will minimize utility grid dependence, and optimize the balance between battery storage and renewable energy sources. GridZero technology provides intelligent energy management for self-generation and self-consumption. It provides precise balancing between using stored battery energy, solar and utility power, blending-in the latter to overcome surges in power demand. The Outback SystemEdge includes everything needed to receive PV solar, and is completely integrated; just hang the system on the wall-mounting bracket, make the necessary connections, and the system is operational. PARTS LIST - Product Features
  • All-in-one package delivers up to 4,000 Watts of continuous power, up to 20 kWh per cycle
  • Battery storage for 3 to 5 days without utility grid or sunshine
  • Save 50% compared to equivalent Tesla Powerwall and inverters
  • Can be installed by anybody... DIY homeowner, handyman, or contractor
  • Can be added to retrofit existing grid-tied PV solar array
  • 4kW continuous power from FLEXpower Radian inverter-charger FPR-4048
  • 20kWh Outback EnergyCELL Nano-Carbon NC batteries for peak or off-grid backup power
  • Nano-Carbon NC batteries can maximize cycle life by up to 44% versus traditional deep cycle batteries
  • Integrated 2-shelf battery rack fits underneath the FLEXpower Radian
  • FLEXware ICS PV Combiner Box for each connection
  • OPTICS RE System monitoring and control
  • Accept input from multiple power sources, solar panels, utility grid, wind turbine, gas generator
  • Made in the USA, factory tested, pre-wired and pre-configured for fast installation
  • Integrated load center can save up to a half day of labor
  • Over-current protection on each battery string provides added safety and flexibility
  • Advanced Grid/Hybrid technology allows for grid-interactive and stand-alone capability in one unit
  • Lifetime 24/7 monitoring system
  • GridZero technology minimizes grid dependence and optimizes the balance between stored and renewable energy sources
  • Qualifies for 30% PV solar tax credits and rebates
  • Certifications ETL, UL1741
  • Manufacturer: Outback Power
  • Country of Origin: USA
  • Model: SystemEdge SE-420NC
  • (1) Outback FLEXpower Radian inverter charger FPR-4048A with GS4048A Radian inverter charger
  • (1) 20 kWh daily cycle use battery pack with (8) Outback EnergyCELL 200NC Deep Cycle AGM 12V, 200AH nano-carbon batteries
  • (1) Battery Rack IBR-2-48-175
  • (1) FLEXware ICS PV Combiner Box
  • (1) OPTICS RE System monitoring and control
  • (1) FLEXmax 80 charge controller
  • (1) MATE3 system display
  • (1) HUB 10.3 communications
  • (1) FLEXnet DC system monitor
  • (1) AC and DC wiring boxes
  • (1) Surge protector
  • (1) Remote temperature sensor (RTS)
  • Shipping Weight: 1,500 lbs
  • Dimensions FlexPower Radian: (H x W x D): 47 x 33.5 x 9.84 inches
  • Dimensions Batteries and Rack: (H x W x D): 33 x 27.0 x 21.25 inches
  • RADIAN GS4048A OPERATING SPECIFICATIONS
  • Continuous Output Power: 4000VA (4,000 watts or 4kW) (25°C)
  • Overload Capacity: 16.97kVA 100ms Surge; 12kVA 5 second surge; 9kVA 30 minutes
  • Nominal DC Input Voltage: 48Vdc
  • DC Input Voltage Range: 40V to 64Vdc
  • AC Input Voltage Range: (L1 or L2) 70V to 280VAC
  • AC Input Frequency Range: 54 to 66Hz @ 60Hz (45 to 55Hz @ 50Hz)
  • AC Output Voltage: 120V - 240Vac
  • AC Output Frequency: 60Hz (50Hz)
  • Continuous AC Output Current: 16.7AAC @ 240VAC (25°C)
  • Maximum Output Current: 1ms Peak: 50AAC @ 240VAC, 100AAC @ 120VAC; 100ms RMS: 33.35AAC @ 240VAC
  • Idle Consumption: 34 watts (Invert Mode, No Load)
  • CEC Weighted Efficiency: 92.5%
  • Maximum Total Harmonic Distortion: <5%
  • Maximum Single Voltage Harmonic Distortion: <2%
  • Output Voltage Regulation: ±2%
  • Grid-Interactive Voltage Range: (L1-N or L2-N) 106 to 132VAC
  • Grid-Interactive Frequency Range: 59.3 to 60.5Hz
  • Maximum AC Input Current: 50 Amps AC
  • Continuous Battery Charge Output: 57.5 Amps DC
  • Temperature Range: Rated -4°F to +122°F; -40°F to +140°F;
  • Accessory Ports: Remote Temperature Sensor, MATE3, HUB Communications
  • Non-Volatile Memory: Yes
  • Field Upgradable Firmware: Yes
  • Chassis Type: Vented
  • Enclosure Type: Galvanized Steel
  • Certifications: Listed to UL1741, CE, CSA C22.2 No. 107.1, IEC, 62109-1, AS4777.2, AS4777.3, EN61000-6-1, EN61000-6-3, EN61000-3-2, EN61000-3-3, AS3100, RoHS compliant per directive 2011/65/EU
  • Warranty: Standard 5 year
  • Weight: 37.2.0 lbs
  • Dimensions (H x W x D): 71 x 40.6 x 22.1 inches
  • Shipping Dimensions (H x W x D): 87.6 x 53.3 x 36.8 inches

Outback Power SystemEdge Diagram

Outback Power SystemEdge Diagram


FLEXpower Radian Inverter Charger with GridZero Technology

GridZero technology provides intelligent energy management for self-generation and self-consumption. It provides precise balancing between using stored energy, solar and utility power, blending-in the latter to overcome surges in power demand. The Outback FLEXpower Radian inverter charger supports seven operating modes.

  • Mini Grid for sites where sufficient renewable energy enables mostly off-grid operation.
  • Grid-Tied for systems in regions with Feed-in-Tarrif (FiT), net-metering or other incentive programs. Control use features include grid use timers.
  • GridZero in areas where incentives are subject to change and utility sell-back options may be limited. Control use features include grid use timers.
  • Support for sites with small generators or inadequate grid power. Control use features include system-level high battery transfer (HBX) programming, prioritizing batteries as primary source.
  • Backup for systems where computers and other sensitive loads are present. Control use features include system-level high battery transfer (HBX) programming, prioritizing batteries as primary source.
  • UPS for installations where uninterrupted power is mission-critical.
  • Generator for systems with undersized or low power quality generators.

Outback FLEXpower Radian inverter charger Introduction

This 2 minute video Introduces you to the Radian Inverter Charger with GridZero technology.


FLEXpower Radian Benefits

  • Higher System Economics: By maximizing the contribution of renewables to total energy consumption, selling back to the grid is no longer required for system Return on Investment (ROI).
  • Lower Cost-of-Entry: Through seamless blending of grid power and renewable energy sources, a smaller system can perform like a much larger one, reducing equipment and installation costs.
  • Greater Simplicity: Because the Radian Series remains connected and synchronized to the grid, no destabilizing transfer is required when grid power is needed.
  • Best Case Scenario Design: As energy policies and incentives change, GridZero technology can prioritize self-consumption and offset over sell-back to always deliver the best renewable energy value possible.
  • Advanced Battery Charging supports traditional batteries and offers expanded charging voltage and time parameters, to accommodate the specific charging profiles and algorithms of newer energy storage technologies like Lithium Ion, Aqueous Ion, or †Flow Chemistry batteries.